SanDisk Memory Card Micro SD Card C10 V30 U3 4K 32GB 64GB 128GB 256GB TF Cards

microSD Speed Class: Class10

Power supply voltage: 2.7 ~ 3.6V (max)

Compatible standards:microSD memory card Ver.3.00/Ver.2.00 standard

Exterior dimensions: 15.0mm (L) * 11.0mm (W) * 1.0mm (T)

32GB = approximately 28GB-30GB

64GB = approximately 58GB-60GB

128GB = approximately 115GB-120GB

256GB = approximately 230GB-238GB

This is calculation difference between manufacturer and your PC, please Google ‘Memory card capacity’ to get more information.

Your PC says 1GB = 1.073741824 Billion bytes where Market Defines 1GB = 1.00 Billion bytes.

Warm Tips:Please use quaity card reader to verify all memory card by H2testw on PC Please don’t use cheap card reader to test Micro SD card, speed of Micro SD card will be reduced by low quality card reader The most reliable software to verify memory card is H2testw

*1 According to SanDisk’s test based on IPX7 standard, the product can function, after it is submerged quietly and left for 30minutes in static tap water at room temperature and in depth of 1m and then it is taken out of the water. Caution remarks on “waterproof”. – If liquid is applied on (touches) the card, remove the liquid by soft cloth immediately. – The waterproof is based on our internal testing, and does not guarantee usage under “all/any” conditions. Please be aware.

*2 ISO7816-1 compliant means, that even after exposing this product to X-ray 0.1Gy, the product will still work.

*3 The Product is labeled based on the memory chip (s) it contains, not the amount of memory capacity available for data storage by the end user. Part of the capacity is reserved for card functionality. Approximate usable capacity is based on 1 GB = 1,073,741,824 bytes.

*4: 1 MB per second is calculated as 1,000,000 bytes per second.

*5: For products incompatible with UHS-I interface, the speeds may vary subject to different interface conditions

* Write speed is slower than transfer speed.

*6: Indicates reading and writing speeds based on SD Association specifications.